Shop headings: New Spares | Used Spares | Accessories | Brands
34 Results - Page 2 of 4
Piston for oil pressure relief valve in lower crankcase
This part is due back in stock soon, call 01484 841395 to reserve yours
31150950 GU31150950 31 15 09 50
3115 0950 3115.0950 31.15.09.50
£12.00
INC VAT
£10.00 EX VAT
Brembo P2 F08 brake caliper piston kit, contains 2 Brembo (P08/P8) coated aluminium pistons
A worthwhile upgrade for earlier twin bleed P08/F08 calipers with steel pistons, seal kits available seperately - BRA37234. Brembo part no. 120225220. Ducati ref. 079739752
This part is due back in stock soon, call 01484 841395 to reserve yours
Also fits Benelli 354, Benelli Sei, Ducati 250/350/450 Desmo (-1976), Ducati Pantah, Ducati F1, Ducati 750 Paso (1987-1990), Ducati 750 Sport (1988-1990), Ducati 860 GT/GTS, Ducati 900 GTS, Ducati Hailwood Rep, Ducati 900 Darmah (1977-1978), Ducati 906 Paso (1988-1989), Ducati 1000 R1 Hailwood Ref., Hesketh, Horex HRD 600, Horex 500/600 Columbus, Laverda 750 SF2, Laverda 750 SFC, Laverda 750 SF3, Laverda 1000 3C (1974-1978), Laverda 1000 3CL (1976-1981), Laverda 1000 RGS/RGA, Laverda 1000 SFC, Laverda 1200 (1978-1979), Laverda 1200 TS/Mirage (1981), MZ ETZ251 (early models only), Norton Classic (1989), Norton Interpol (1989), Triumph T140 (1985-1988 Brembo)
£35.00
INC VAT
£29.17 EX VAT
Pair of replacement anodised alloy pistons for Brembo F05 (P5) calipers. These also fit Grimeca calipers with 32mm pistons
Also used on some Laverdas. BRA19301 for alternative part in stainless steel
This part is due back in stock soon, call 01484 841395 to reserve yours
19652300 GU19652300 19 65 23 00
1965 2300 1965.2300 19.65.23.00
Also fits Benelli 250 TS, Ducati Pantah 500SL
£31.80
INC VAT
£26.50 EX VAT
Piston ring compressing tool, compresses piston rings to fit into bore. Without this tool you risk snapping piston rings, the tool also speeds up the fitting of new rings
For 57mm - 125mm bores, supplied with hex key for bore adjustment. Not suitable for CARC models
This part is available by special order, request a quote
£48.00
INC VAT
£40.00 EX VAT
Single replacement caliper piston for Brembo P2 F09 or P9 caliper as fitted to Spada rear.
NB you will require a pair of these. Also used on Benelli Sei rear. Corresponding caliper seal kit is BRA54722
2 in stock
20391310 GU20391310 20 39 13 10
2039 1310 2039.1310 20.39.13.10
Also fits Benelli 900 Sei Rear (1983), Laverda 1000 RGS Fronts (1984)
£20.00
INC VAT
£16.67 EX VAT
Piston ring set for 1 piston, only for models equipped with Gilardoni piston and barrel sets
Oil ring is 4mm high
This part is available by special order, request a quote
£35.00
INC VAT
£29.17 EX VAT
1 Litre of Millers Classic Pistoneeze SAE20W-50 mineral oil. We recommend this classic engine oil for older (pre 1998) 2 valve twins, it is similar to Castrol GTX 20/50 (which is no longer available). Pistoneeze 20w50 is a moderate detergent premium SAE 20w50 multigrade mineral engine oil. The formulation includes high quality solvent refined base oils with the latest technology performance additives and shear stable viscosity index improver.
Features & Benefits:
Quantities required:
More than 5 in stock
Also fits Triumph Bonneville T100
£11.00
INC VAT
£9.17 EX VAT
5 Litres of Millers Classic Pistoneeze SAE20W-50 mineral oil. We recommend this classic engine oil for older (pre 1998) 2 valve big twins, it is similar to Castrol GTX 20/50 (which is no longer available). The Classic Pistoneeze 20w50 is a moderate detergent premium SAE 20w50 multigrade mineral engine oil. The formulation includes high quality solvent refined base oils with the latest technology performance additives and shear stable viscosity index improver.
Features & Benefits:
Quantities required:
3 in stock
Also fits Triumph Bonneville T100
£35.00
INC VAT
£29.17 EX VAT
Rebuild kit for Grimeca F05 (P5) type calipers with 32mm pistons
This caliper also known as P2 F05N, P32B and P32F.
This seal kit also known as Brembo ref. 120279910, also used on Benelli 504 Sport, 650 Al'Azzura, Ducati 500s, Laverda 500 Montjuich and Zeta (front) and Bimota DB1 and YB4 (rear).
Not suitable for P32 rear calipers fitted to 750T and Nevada 750 (1991-2001) - see BRA01723 for this model.
This part is due back in stock soon, call 01484 841395 to reserve yours
Also fits Benelli 504 Sport, Benelli 250 TS, Ducati Pantah 500SL, 650 Al'Azzura, Ducati 500s, Laverda 500 Montjuich and Zeta (front) and Bimota DB1 and YB4
£24.00
INC VAT
£20.00 EX VAT
Replacement piston seals and spring for Grimeca front master cylinder
See BRA28278 for a complete replacement master cylinder
Sorry, this part is no longer available.
30659330 GU30659330 30 65 93 30
3065 9330 3065.9330 30.65.93.30
Sorry this item is out of production